ISO Metric Coarse Thread · DIN 13-1 / ISO 261
M14 Thread: Pitch, Tap Drill & Dimensions
M14 is an ISO metric coarse thread with a 2 mm pitch. The tap drill is 12 mm, and the internal minor diameter D1 is 11.835 mm.
| Nominal (major) diameter | 14 mm |
|---|---|
| Pitch | 2 mm (coarse) |
| Tap drill (D − P) | 12 mm |
| Pitch diameter d2 / D2 | 12.701 mm |
| Minor diameter, external d3 | 11.546 mm |
| Minor diameter, internal D1 | 11.835 mm |
| Thread depth, external h3 | 1.227 mm |
| Flank angle | 60° |
| Clearance hole (fine / medium / coarse) | 15 / 15.5 / 16.5 mm |
| Hex spanner size (ISO 4032) | 21 mm (DIN 934: 22 mm) |
| Socket cap screw hex key (ISO 4762) | 12 mm |
Common questions
What size drill do I use to tap M14?
Use a 12 mm drill. This is the standard tap drill for M14; for hard materials or deep threads a slightly larger drill reduces tapping torque.
What is the pitch of M14?
The pitch of M14 is 2 mm (coarse), meaning the thread advances that distance in one full turn.
Where can I find other ISO Metric Coarse Thread sizes?
The full ISO Metric Coarse Thread table, with every size and a live filter, is on its standard page, and the Thread Finder searches all 73 standards at once.
Reference values; computed values use the ISO basic profile. Verify against the current standard before production use.