ISO Metric Coarse Thread · DIN 13-1 / ISO 261
M7 Thread: Pitch, Tap Drill & Dimensions
M7 is an ISO metric coarse thread with a 1 mm pitch. The tap drill is 6 mm, and the internal minor diameter D1 is 5.917 mm.
| Nominal (major) diameter | 7 mm |
|---|---|
| Pitch | 1 mm (coarse) |
| Tap drill (D − P) | 6 mm |
| Pitch diameter d2 / D2 | 6.35 mm |
| Minor diameter, external d3 | 5.773 mm |
| Minor diameter, internal D1 | 5.917 mm |
| Thread depth, external h3 | 0.613 mm |
| Flank angle | 60° |
Common questions
What size drill do I use to tap M7?
Use a 6 mm drill. This is the standard tap drill for M7; for hard materials or deep threads a slightly larger drill reduces tapping torque.
What is the pitch of M7?
The pitch of M7 is 1 mm (coarse), meaning the thread advances that distance in one full turn.
Where can I find other ISO Metric Coarse Thread sizes?
The full ISO Metric Coarse Thread table, with every size and a live filter, is on its standard page, and the Thread Finder searches all 73 standards at once.
Reference values; computed values use the ISO basic profile. Verify against the current standard before production use.