UNF Unified Fine Thread · ANSI/ASME B1.1
#5 - 44 UNF Thread: Pitch, Tap Drill & Dimensions
#5 - 44 UNF is a UNF Unified Fine Thread (ANSI/ASME B1.1) size, with a major diameter of 3.175 mm, 44 threads per inch (0.577 mm pitch). The tap drill is 2.70 mm.
| Major Diameter (inch) | 0.125 |
|---|---|
| Major Diameter (mm) | 3.175 |
| Tapping Drill Size (mm) | 2.70 |
| TPI | 44 |
| Pitch (mm) | 0.577 |
| Flank angle | 60° |
Common questions
What size drill do I use to tap #5 - 44 UNF?
Use a 2.70 drill. This is the standard tap drill for #5 - 44 UNF; for hard materials or deep threads a slightly larger drill reduces tapping torque.
What is the pitch of #5 - 44 UNF?
The pitch of #5 - 44 UNF is 0.577, meaning the thread advances that distance in one full turn.
Where can I find other UNF Unified Fine Thread sizes?
The full UNF Unified Fine Thread table, with every size and a live filter, is on its standard page, and the Thread Finder searches all 73 standards at once.
Reference values; computed values use the ISO basic profile. Verify against the current standard before production use.