PG Conduit Thread (Panzergewinde) · DIN 40430
Pg 36 Thread: Pitch, Tap Drill & Dimensions
Pg 36 is a PG Conduit Thread (Panzergewinde) (DIN 40430) size, with a major diameter of 47.0 mm, a pitch of 1.59 mm. The tap drill is 45.5 mm.
| For cable diameter (mm) | 32.0 |
|---|---|
| Major Diameter (mm) | 47.0 |
| Tapping Drill Size | 45.5 |
| Pitch (mm) | 1.59 |
| Threads per inch (TPI) | 15.97 |
| Flank angle | 80° |
Common questions
What size drill do I use to tap Pg 36?
Use a 45.5 drill. This is the standard tap drill for Pg 36; for hard materials or deep threads a slightly larger drill reduces tapping torque.
What is the pitch of Pg 36?
The pitch of Pg 36 is 1.59, meaning the thread advances that distance in one full turn.
Where can I find other PG Conduit Thread (Panzergewinde) sizes?
The full PG Conduit Thread (Panzergewinde) table, with every size and a live filter, is on its standard page, and the Thread Finder searches all 73 standards at once.
Reference values; computed values use the ISO basic profile. Verify against the current standard before production use.