PG Conduit Thread (Panzergewinde) · DIN 40430
Pg 9 Thread: Pitch, Tap Drill & Dimensions
Pg 9 is a PG Conduit Thread (Panzergewinde) (DIN 40430) size, with a major diameter of 15.2 mm, a pitch of 1.41 mm. The tap drill is 13.9 mm.
| For cable diameter (mm) | 8.0 |
|---|---|
| Major Diameter (mm) | 15.2 |
| Tapping Drill Size | 13.9 |
| Pitch (mm) | 1.41 |
| Threads per inch (TPI) | 18.01 |
| Flank angle | 80° |
Common questions
What size drill do I use to tap Pg 9?
Use a 13.9 drill. This is the standard tap drill for Pg 9; for hard materials or deep threads a slightly larger drill reduces tapping torque.
What is the pitch of Pg 9?
The pitch of Pg 9 is 1.41, meaning the thread advances that distance in one full turn.
Where can I find other PG Conduit Thread (Panzergewinde) sizes?
The full PG Conduit Thread (Panzergewinde) table, with every size and a live filter, is on its standard page, and the Thread Finder searches all 73 standards at once.
Reference values; computed values use the ISO basic profile. Verify against the current standard before production use.