Enclosures
Sheet metal enclosures house electrical, electronic and mechanical equipment, protecting it from dust, water and damage. We supply custom enclosures, panels and housings with doors, cut-outs, gland plates, inserts and powder-coated finishes.
What it is
Enclosures are laser cut, bent and welded or fastened, with cut-outs for displays, switches and ventilation. Gaskets, hinges and locks complete doors, while inserts and studs allow component mounting.
Ingress protection (IP) ratings depend on design, gaskets and construction quality; the target rating should be stated at the outset.
Typical applications
- Electrical control panels
- Electronics and instrument housings
- Outdoor junction boxes
- Machine control cabinets
- Kiosk and equipment housings
Suitable materials
- CRCA and HR mild steel
- Galvanised steel (GI/GP)
- Stainless steel (304, 316)
- Aluminium (5052, 6061)
Points to consider
- State the IP rating and environment; it drives gasket and seam design.
- Mark cut-out positions accurately; late changes are costly after coating.
- Stainless steel suits wash-down and outdoor corrosive areas.
- Consider heat dissipation and ventilation for electronics.
Frequently asked questions
Can you make IP65 enclosures?
Yes, with suitable design, gasketed doors and sealed seams. State the required rating at the quote stage.
What finishes are available?
Powder coating in RAL colours on mild steel, natural or brushed stainless steel, and anodised aluminium.
Can cut-outs be added for components?
Yes. Cut-outs for displays, switches, glands and ventilation are laser cut to your layout.