Frames
Fabricated frames are welded or bolted structures that support machines, equipment, conveyors and assemblies, built from hollow sections, angles, channels and plate to your drawing. Critical mounting faces can be machined after welding for accuracy.
What it is
Members are cut, fitted in jigs and welded, with attention to squareness and flatness. Mounting pads and plates are often machined after stress relieving so equipment sits true.
Frames are finished with primer and paint, powder coating or galvanising for the working environment.
Typical applications
- Machine and equipment base frames
- Conveyor and automation frames
- Skids for pumps and compressors
- Test rigs and fixtures
- Panel and enclosure frames
Suitable materials
- Structural steel (IS 2062 E250/E350)
- Stainless steel
- Aluminium
- Hollow sections and pipes
Points to consider
- Welding distorts frames; machine mounting faces after welding if they must be flat.
- Hollow sections give good stiffness-to-weight.
- Add lifting points and levelling pads where needed.
- Bolted designs ship flat and assemble on site.
Frequently asked questions
Can frame mounting surfaces be machined?
Yes. Mounting pads are commonly machined after welding and stress relief for flatness and alignment.
Which sections are best for machine frames?
Square and rectangular hollow sections give good stiffness; channels and beams suit heavier frames.
Can frames be powder coated?
Yes, subject to oven size. Larger frames use liquid paint systems.