Industrial Hardware & Special Components
Industrial hardware covers standard and custom fasteners, seals, bearings, and related mechanical components used across assemblies. We coordinate standard hardware alongside special, non-standard components manufactured or sourced to drawing.
Standard Fasteners
Catalogue-standard bolts, screws, nuts, and washers.
Details →Special Fasteners
Non-standard fasteners manufactured or sourced to drawing.
Details →Custom Fasteners
Fasteners manufactured to a specific design outside standard catalogues.
Details →Non-standard Fasteners
Fasteners with non-standard dimensions, materials, or thread forms.
Details →Bolts
Threaded fasteners for clamping and structural joints.
Details →Screws
Threaded fasteners for general assembly and fixing.
Details →Nuts
Internally threaded fasteners used with bolts and studs.
Details →Washers
Flat or spring components used under fasteners for load distribution or locking.
Details →Studs
Externally threaded rods used for fastening two components together.
Details →Pins
Machined pins used for locating, fastening, or pivoting.
Details →Rivets
Permanent mechanical fasteners for joining sheet and structural components.
Details →Threaded Components
Components manufactured with a specified thread form and pitch.
Details →NPT Threaded Flanges
ASME B16.5 threaded flanges with NPT taper threads, made to order since Indian stockists rarely hold them, and supplied marked, certified and ready to fit.
Details →Special Hardware
Non-standard hardware components manufactured or sourced to drawing.
Details →Gaskets
Sealing components fitted between mating surfaces to prevent leakage.
Details →Seals
Components used to prevent fluid or contaminant ingress at moving or static joints.
Details →O-Rings
Elastomeric ring seals used in static and dynamic sealing applications.
Details →Rubber Components
Moulded or machined rubber parts for sealing, cushioning, or vibration damping.
Details →Rubber-to-Metal Components
Bonded rubber-to-metal components for mounting and vibration isolation.
Details →Bushes
Bearing or guide bushings in metal or plastic.
Details →Bearings
Rolling or plain bearings for supporting rotating or sliding loads.
Details →Springs
Compression, tension, or torsion springs manufactured to specification.
Details →Clamps
Fasteners or fixtures used to hold or secure components in place.
Details →Retaining Components
Circlips, retaining rings, and similar components used to locate parts on a shaft or in a bore.
Details →Custom Hardware
Hardware components manufactured to a specific design.
Details →Made-to-Drawing Hardware
Hardware manufactured strictly to a supplied drawing or specification.
Details →Don't see exactly what you need?
Send a drawing, sample, photo or part number. We'll find the right route through our network and come back with a quote.
Send before 5 pm (Mon–Sat) and we'll quote or reply the same day. Later requests by noon the next working day.